Solimar hatches in "E" glass or composite are manufactured on male and
female molds, with or without camber. Lay-up is under vacuum at a maximum
temperature of 120° C and at a pressure of 3 bar. It is widely recognized
by our clients that the final hatch is technologically advanced and perfect in
each detail. The hardware is very strong and the "car body"
finish with 2 can paint is very accurate. The final look of the hatch
ready to be laminated to the boat deck will have no defects whatsoever.
Solimar has developed an instruction sheet for the correct selection of all accessories. Panels can be glass, Perspex or Plexiglas.
Hatches sizes, with or without camber, are as follows:
| Art | Clear dimensions | Overall dimensions |
| 0062/15-3 0062/2-3 0062/3-3 0062/3-4 0062/5 0062/7 0062/7-8 0062/8-8 0062/95 |
130x280 220x320 310x310 310x410 500x500 700x700 700x800 800x800 950x950 |
328x468 430x530 515x515 515x615 695x695 895x895 895x989 989x989 1118x1118 |
N.B. Additional sizes available upon request
Hatch ready for lay-up, complete with all accessories
Hinge detail, ready for laying teak deck
Detail of gas spring attachment
Hinges art. 0062/f-q-i are stainless steel at 90°-180°,
adjustable, thickness mm 8-10-12-14.
Handles art. 0062/b-c-d-e are stainless steel or aluminum and are adjustable in
height.
Gas springs are stainless steel and are delivered with pressure matching the
hatch to be opened.
Further details can be requested from the Solimar technical department. Designers and builders can request a CD Rom with all the relevant information.
Home ·
Company profile ·
Steering systems ·
Steering components ·
Composite steering components ·
Rudders, shafts and bearings ·
Blocks ·
Travelers ·
Accessories ·
Traditional and classic boats ·
Hatches ·
Agents